Blog
ControlLogix Modules
01

Dec

1756 ControlLogix® chassis-based modules provide a full range of digital, diagnostic digital, analog, motion control, specialty I/O, and compute modules to meet your application needs. You can use any of the chassis-based modules in the local chassis of a ControlLogix controller or in a chassis linked to a ControlLogix controller across ControlNet™ or EtherNet/IP™ networks.


Overview for ControlLogix

  • Mounts in a ControlLogix® chassis

  • Requires either a removable terminal block (RTB) or a Bulletin 1492 wiring interface module (IFM) to connect all field-side wiring
  • Includes inherent time-stamping capabilities for sequence of events (SOE) applications
  • Offers EtherNet/IP™ communication, including CIP Security™ and redundancy capability
  • Offers comprehensive I/O diagnostics for detection of both system and field-side failures
  • Provides removal and insertion under power (RIUP) for ease of maintenance
  • Offers electronic keying to help prevent replacement errors
  • Includes I/O wizards in the Studio 5000 Logix Designer® application to enable quick and easy module configuration




1756 ControlLogix CIP Safety I/0 Modules

  • Supports Compact GuardLogix® 5380 or GuardLogix 5580 controllers
  • Offers functional safety rated up to and including SIL3 and PLe
  • Supports CIP safety bridging and routing functionality
  • Use as local I/O or distributed I/O with 5580 GuardLogix controller
  • Provides enhanced reaction time
  • Uses the Logix Designer application version 32
  • Offers digital input modules: IB16S – 16 channels (each SIL 3 rated)
  • Offers digital output modules: OBV8S – 8 channels (each SIL 3 rated)
  • Includes compliance markings: TÜV, UL, IECEx, ATEX, CE, Marine, FM

ControlLogix Digital I/O Modules

  • Offers a variety of voltages  Provides 8 to 32 points per module
  • Offers isolated and non-isolated module types
  • Includes point-level output fault states
  • Offers direct-connect or rack-optimized communication
  • Offers field-side diagnostics on select modules


1756 ControlLogix Analog I/O Modules

  • Includes input, output, and combination modules
  • Provides thermocouple and RTD modules
  • Includes on-board data alarming
  • Offers scaling to engineering units
  • Provides real-time channel sampling
  • Offers electronic module keying, and is software configurable
  • Includes mechanical RTB keying, user-defined
  • Offers per channel configuration for voltage, current or 2-wire transmitter current sourcing
  • Offers Per channel configuration for either RTD or Thermocouple
  • As of March 31, 2017, the ControlLogix 1756 Isolated Analog I/O 6-channel modules will be discontinued and no longer available for sale. Customers are encouraged to migrate to the 1756 Isolated Analog I/O 8-channel modules using the Migrating 6-channel to 8-channel 1756 Analog Modules Migration Guide


1756 ControlLogix Specialty I/O Modules

  • Includes configurable flow meter modules
  • Provides high-speed counter modules
  • Offers programmable limit switch modules

1756 ControlLogix Removable Terminal Blocks (RTBs)

  • Provides a flexible interconnection between plant wiring and I/O modules
  • Includes screw-clamp or spring-clamp terminations
  • Not shipped with I/O modules; you must order separately


1756 HART Analog Isolated I/O Modules

  • Includes channel-to-channel isolation
  • Offers HART modem per channel for faster HART data update
  • Offers basic field device configuration via the Add-on Profile
  • Helps eliminate the need for field isolating barriers when using isolated modules
  • Offers 8- or 16-channel density modules


1756 Enhanced Analog I/O Modules

  • Offers increased accuracy, repeatability, stability, and precision
  • Includes isolated 8-channel and non-isolated 12- and 16-channel modules with stability over the entire temperature operating range
  • Does not require field calibration
  • Offers advanced precision using 24-bit design
  • Includes per channel status and fault LED annunciation
  • Offers SIL 1, systematic capability 2, type certified for use in a ControlLogix SIL 2 architecture
  • Offers an emulation mode that helps enable customers to migrate from 6-channel applications


1756 Communications Modules

  • Implements network-based access control for users, devices, and networks in the 1756 chassis
  • Offers redundancy capabilities
  • Offers security modules to encrypt important information shared between controllers and servers to prevent tampering


1756 Compute Module

  • Provides high-speed access to the ControlLogix controller over the backplane
  • Integrated DisplayPort™ for direct connection to a high-definition 5100 industrial monitor
  • Provides computing capability in a ControlLogix chassis


click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact